`configure' configures openocd 0.11.0+dev to adapt to many kinds of systems. Usage: ./configure [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print `checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for `--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or `..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [/usr/local] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, `make install' will install all the files in `/usr/local/bin', `/usr/local/lib' etc. You can specify an installation prefix other than `/usr/local' using `--prefix', for instance `--prefix=$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/openocd] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-shared[=PKGS] build shared libraries [default=no] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-assert turn off assertions --disable-doxygen-html Disable building Doxygen manual as HTML. --enable-doxygen-pdf Enable building Doxygen manual as PDF. --disable-gccwarnings Disable compiler warnings --disable-wextra Disable extra compiler warnings --disable-werror Do not treat warnings as errors --enable-verbose Enable verbose JTAG I/O messages (for debugging). --enable-verbose-usb-io Enable verbose USB I/O messages (for debugging) --enable-verbose-usb-comms Enable verbose USB communication messages (for debugging) --enable-malloc-logging Include free space in logging messages (requires malloc.h). --enable-dummy Enable building the dummy port driver --enable-rshim Enable building the rshim driver --enable-ftdi Enable building support for the MPSSE mode of FTDI based devices (default is auto) --enable-ftdi-oscan1 Enable building support for the cJTAG OSCAN1 tunneled thru MPSSE (default is auto) --enable-stlink Enable building support for the ST-Link Programmer (default is auto) --enable-ti-icdi Enable building support for the TI ICDI JTAG Programmer (default is auto) --enable-ulink Enable building support for the Keil ULINK JTAG Programmer (default is auto) --enable-usb-blaster-2 Enable building support for the Altera USB-Blaster II Compatible (default is auto) --enable-ft232r Enable building support for the Bitbang mode of FT232R based devices (default is auto) --enable-vsllink Enable building support for the Versaloon-Link JTAG Programmer (default is auto) --enable-xds110 Enable building support for the TI XDS110 Debug Probe (default is auto) --enable-cmsis-dap-v2 Enable building support for the CMSIS-DAP v2 Compliant Debugger (default is auto) --enable-osbdm Enable building support for the OSBDM (JTAG only) Programmer (default is auto) --enable-opendous Enable building support for the eStick/opendous JTAG Programmer (default is auto) --enable-armjtagew Enable building support for the Olimex ARM-JTAG-EW Programmer (default is auto) --enable-rlink Enable building support for the Raisonance RLink JTAG Programmer (default is auto) --enable-usbprog Enable building support for the USBProg JTAG Programmer (default is auto) --enable-aice Enable building support for the Andes JTAG Programmer (default is auto) --enable-cmsis-dap Enable building support for the CMSIS-DAP Compliant Debugger (default is auto) --enable-nulink Enable building support for the Nu-Link Programmer (default is auto) --enable-kitprog Enable building support for the Cypress KitProg Programmer (default is auto) --enable-usb-blaster Enable building support for the Altera USB-Blaster Compatible (default is auto) --enable-presto Enable building support for the ASIX Presto Adapter (default is auto) --enable-openjtag Enable building support for the OpenJTAG Adapter (default is auto) --enable-buspirate Enable building support for the Bus Pirate (default is auto) --enable-jlink Enable building support for the SEGGER J-Link Programmer (default is auto) --enable-parport Enable building the pc parallel port driver --disable-parport-ppdev Disable use of ppdev (/dev/parportN) for parport (for x86 only) --enable-parport-giveio Enable use of giveio for parport (for CygWin only) --enable-jtag_vpi Enable building support for JTAG VPI --enable-jtag_dpi Enable building support for JTAG DPI --enable-amtjtagaccel Enable building the Amontec JTAG-Accelerator driver --enable-bcm2835gpio Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi) --enable-imx_gpio Enable building support for bitbanging on NXP IMX processors --enable-ep93xx Enable building support for EP93xx based SBCs --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs --enable-gw16012 Enable building support for the Gateworks GW16012 JTAG Programmer --enable-sysfsgpio Enable building support for programming driven via sysfs gpios. --enable-xlnx-pcie-xvc Enable building support for Xilinx XVC/PCIe. --disable-internal-jimtcl Disable building internal jimtcl --disable-internal-libjaylink Disable building internal libjaylink --enable-remote-bitbang Enable building support for the Remote Bitbang jtag driver Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-aix-soname=aix|svr4|both shared library versioning (aka "SONAME") variant to provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified). --with-capstone Use Capstone disassembly library (default=auto) Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path LT_SYS_LIBRARY_PATH User-defined run-time library search path. CPP C preprocessor LIBUSB1_CFLAGS C compiler flags for LIBUSB1, overriding pkg-config LIBUSB1_LIBS linker flags for LIBUSB1, overriding pkg-config CAPSTONE_CFLAGS C compiler flags for CAPSTONE, overriding pkg-config CAPSTONE_LIBS linker flags for CAPSTONE, overriding pkg-config HIDAPI_CFLAGS C compiler flags for HIDAPI, overriding pkg-config HIDAPI_LIBS linker flags for HIDAPI, overriding pkg-config LIBFTDI_CFLAGS C compiler flags for LIBFTDI, overriding pkg-config LIBFTDI_LIBS linker flags for LIBFTDI, overriding pkg-config LIBGPIOD_CFLAGS C compiler flags for LIBGPIOD, overriding pkg-config LIBGPIOD_LIBS linker flags for LIBGPIOD, overriding pkg-config LIBJAYLINK_CFLAGS C compiler flags for LIBJAYLINK, overriding pkg-config LIBJAYLINK_LIBS linker flags for LIBJAYLINK, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to >.